6 Search Results

The development of microalgal biorefineries, utilizing high-value coproducts, offers a strategy to lower biofuel production costs, while the use of saline-tolerant microalgal species contributes to reducing freshwater consumption. This study evaluates the life cycle performance of saline microalgae cultivation and conversion at a national scale by analyzing economics, greenhouse gas (GHG) emissions, marginal GHG avoidance cost (MAC), water scarcity footprints, land-use change emissions, and resource availability. The Algal Biomass Assessment Tool (BAT) is applied for site selection, while algae farm and conversion models are used for techno-economic analysis (TEA). The Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (GREET)more » model is employed for life cycle assessment (LCA) by integrating the outputs from BAT and TEA. Our findings demonstrate that electricity and nutrient consumption are the primary drivers of base case GHG emissions, while biomass yield is the key factor determining both GHG emissions and economic performance. Saline microalgal biorefineries can achieve a MAC limit of $$\$$$$80–200/tonne when high-value bio-coproducts, such as whey protein concentrate, are benchmarked, contingent on supply-demand conditions and other market drivers. However, this reduction may not be compatible with current carbon prices. Further increase in biomass yield, reductions in energy and nutrient usage, and the careful selection of high-value protein coproduct targets with high conventional GHG emissions during the design stage are recommended. Additionally, saline microalgal biorefineries show great potential in addressing water stress, as the electricity requirements for desalinating brackish and saline water are relatively low compared to the overall system electricity demand.« less

Rotating Algae Biofilm Reactors (RABRs) are a promising technology for efficient treatment of wastewater and production of algae-based bioproducts. However, RABR-grown algae can contain a high content of ash (30–60 wt%, dry basis), which influences the technical and economic feasibility of bioproduct conversion processes. In this report, experimental studies and economic analysis were conducted to compare different processes for bioproduct conversion of a high-ash microalgae biofilm grown using a RABR treating 0.6 million gallons per day of anaerobic digestion centrate at the Central Valley Water Reclamation Facility in Salt Lake City, UT. Process and economic models were developed and comparedmore » for three conversion processes: 1) the production of bioplastics, 2) the production of bioplastics with a lipid-extraction pretreatment, and 3) the production of biocrude via hydrothermal liquefaction. Techno-economic analysis was performed for each conversion process, including three cases for algae productivity: 231, 391, and 577 metric tons per year (dry basis). The calculated value for the minimum plastic selling price (MPSP) of bioplastics produced from algae ranges from $$\$$4050$ to $$\$$3520$ per metric ton based on the baseline and final productivity cases of the RABR, respectively. The extraction of lipids in addition to bioplastic production results in an MPSP of $$\$$4570$ to $$\$$4000$ per metric ton for the same productivity cases. The relatively small production scale and complex processing for hydrothermal liquefaction results in a minimum fuel selling price of the biocrude of $$\$$5.32$ per gallon of gasoline equivalent. In conclusion, the conversion process for bioplastic production from whole algae has the highest income:expense ratio and the most cost-competitive pricing of the three modeled processes.« less